site stats

Photoredox Catalysis & Parallel Synthesis

Gen II 96-Position LED Arrays

Incorporating a uniquely molded, ultra-clear, chemically inert 96-position Lens Mat, Analytical Sales' patent-pending Lumidox II 96-Position LED array design captures nearly all of the light emitted by the LEDs and directs it into the reaction vials. This new design has a potential 40x improvement from previous generations.

An alternative flat-surface, chemically inert Diffuse Mat is available for standard SLAS footprints, as well as niche applications such as illuminating cell culture flasks, reservoir plates, and large scale containers.

Both array styles are available with either an Active Cooling Base or a Passive (solid) Base. Two different lens styles and two bases allow for 48+ possible configurations. Note: Solid base arrays are NOT self-cooling and require the use of a sufficient chiller/cooling device.

A note about array cooling and operating temperature
For added protection, each device has a built-in thermal cutoff switch that, in case of overheating, will automatically shut down the unit. The trip temperature for Solid Base Arrays is 95°C, and will reset when cooled to 65°C. Active Cooling Base Arrays will shut down if their temperature exceeds 75°C. They will reset once they have cooled to 45°C. Note: Active Cooling Base arrays are not compatible with strong magnetic fields such as those found in most tumble stirrers due to interference with the cooling fans.



96-Well Array - Lens Mat with Active Cooling Base


96-Well Array - Lens Mat with Solid Base


96-Well Array - Diffuse Mat with Active Cooling Base


96-Well Array - Diffuse Mat with Solid Base


Lumidox® II STAGES
By default, all Lumidox II devices are factory calibrated with 5 discrete linearly stepped output STAGES... Expand

Lumidox® II STAGE Selection
By default, all Lumidox II devices are factory calibrated with 5 discrete linearly stepped output STAGES (Example 1, below). STAGE 1 output is the least radiometric power while STAGE 5 output is the most. For LED arrays with Active Cooling Stage bases, STAGE 5 thermal dissipation requirements are configured to an appropriate level for each device's built-in thermal satisfaction abilities. STAGE 5 defaults for Passive (solid) Base Arrays are tuned to be thermally satisfied with an average powered chiller in thermal contact with the array base. STAGES are calibrated to nearest whole number of radiant flux, and displayed in milliwatts (mW).

Analytical Sales & Services offers custom tuned stages to meet specific and unique requirements. A user, for example, may have a more sophisticated cooling mechanism and require an array tuned for maximum light output. In this scenario, Analytical would tune the upper STAGES to higher levels than typically thermally controllable by standard users (Example 2). In another example, a user may have a need for a tighter resolution of STAGES (Example 3).



For custom STAGE settings, please contact Analytical Sales & Services before ordering. Note: STAGES may only be calibrated at the time of shipment.


96-Well LED Arrays with Lens Mat and Active Cooling Base

Radiant Flux Values per STAGE | Irradiance Values per STAGE
Example (typical values*)
Stage 1 Radiant FluxStage 2 Radiant FluxStage 3 Radiant Flux Stage 4 Radiant FluxStage 5 Radiant Flux
Catalog No.WavelengthPer well (mW)Total (W)Per well (mW)Total (W)Per well (mW) Total (W)Per well (mW)Total (W)Per well (mW)Total (W)
LUM296LA365UV365252.4555.3807.710510.113513.0
LUM296LA375 UV375 25 2.4 50 4.8 75 7.2 110 10.6 140 13.4
LUM296LA385UV385302.9656.21009.614513.916515.8
LUM296LA395UV395302.9656.210510.114013.417016.3
LUM296LA405UV405252.4605.8908.61251216015.4
LUM296LA420420-Violet302.9605.8908.612011.515014.4
LUM296LA445445-Indigo605.812011.519518.724023.029528.3
LUM296LA470470-Blue454.3959.114013.418017.322021.1
LUM296LA505505-Cyan353.4656.2908.611511.013513.0
LUM296LA527527-Green252.4555.3807.71009.611010.6
LUM296LA590590-Amber757.2959.111511.015014.418017.3
LUM296LA630630-Red302.9555.3858.211511.014513.9
LUM296LA660 660-Deep Red 40 3.8 70 6.7 105 10.1 140 13.4 170 16.3
LUM296LA730 IR730 35 3.4 65 6.2 95 9.1 125 12.0 155 14.9
LUM296LAWHTWhite504.81009.615014.420019.230028.8


96-Well LED Arrays with Lens Mat and Active Cooling Base

Radiant Flux Values per STAGE | Irradiance Values per STAGE
Example (typical values*)
Irradiance at Surface of Each Lens Mat Tip
Stage 1 Stage 2 Stage 3 Stage 4 Stage 5
Catalog No. Wavelength (mW/cm2) (mW/cm2) (mW/cm2) (mW/cm2) (mW/cm2)
LUM296LA365UV365 125 280 405 535 690
LUM296LA375 UV375 125 255 380 560 715
LUM296LA385UV385 155 330 510 470 840
LUM296LA395UV395 155 330 535 715 865
LUM296LA405UV405 125 305 460 635 815
LUM296LA420420-Violet 155 305 460 610 765
LUM296LA445445-Indigo 305 610 995 1220 1500
LUM296LA470470-Blue 230 485 715 915 1120
LUM296LA505505-Cyan 180 330 460 585 690
LUM296LA527527-Green 130 280 410 510 560
LUM296LA590590-Amber 380 485 585 765 915
LUM296LA630630-Red 155 280 435 585 740
LUM296LA660 660-Deep Red 205 355 535 715 865
LUM296LA730 IR730 180 330 485 635 790
LUM296LAWHTWhite 255 510 765 1020 1530


96-Well LED Arrays with Lens Mat and Solid Base

Radiant Flux Values per STAGE | Irradiance Values per STAGE
Example (typical values*)
Stage 1 Radiant FluxStage 2 Radiant FluxStage 3 Radiant Flux Stage 4 Radiant FluxStage 5 Radiant Flux
Catalog No.WavelengthPer well (mW)Total (W)Per well (mW)Total (W)Per well (mW) Total (W)Per well (mW)Total (W)Per well (mW)Total (W)
LUM296LS365UV365 55 5.3 110 10.8 165 15.8 215 20.6 395 37.9
LUM296LS375 UV375 50 4.8 125 12.0 160 15.4 220 21.1 275 26.4
LUM296LS385 UV385 65 6.2 145 13.9 210 20.2 350 33.6 425 40.8
LUM296LS395 UV395 65 6.2 135 13.0 250 24.0 330 31.7 510 49.0
LUM296LS405 UV405 70 6.7 145 13.9 200 19.2 285 27.4 435 41.8
LUM296LA420420-Violet605.812011.518017.323522.634032.6
LUM296LS445 445-Indigo 120 11.5 240 23.0 350 33.6 460 44.2 650 62.4
LUM296LS470 470-Blue 95 9.1 190 18.2 275 26.4 350 33.6 500 48.0
LUM296LS505 505-Cyan 60 5.8 115 11.0 165 15.8 210 20.2 290 27.8
LUM296LS527 527-Green 55 5.3 100 9.6 140 13.4 175 16.8 215 20.6
LUM296LS590 590-Amber 75 7.2 145 13.9 210 20.2 295 28.3 380 36.5
LUM296LS630 630-Red 55 5.3 115 11.0 175 16.8 230 22.1 330 31.7
LUM296LS660 660-Deep Red 70 6.7 140 13.4 205 19.7 275 26.4 400 38.4
LUM296LS730 IR730 65 6.2 125 12.0 185 17.8 245 23.5 365 35.0
LUM296LSWHT White 70 6.7 140 13.4 210 20.2 275 26.4 400 38.4


96-Well LED Arrays with Lens Mat and Solid Base

Radiant Flux Values per STAGE | Irradiance Values per STAGE
Example (typical values*)
Irradiance at Surface of Each Lens Mat Tip
Stage 1 Stage 2 Stage 3 Stage 4 Stage 5
Catalog No. Wavelength (mW/cm2) (mW/cm2) (mW/cm2) (mW/cm2) (mW/cm2)
LUM296LS365UV365 280 560 840 1095 2010
LUM296LS375 UV375 255 635 815 1120 1400
LUM296LS385UV385 330 740 1070 1785 2165
LUM296LS395UV395 330 690 1275 1680 2595
LUM296LS405UV405 355 740 1020 1450 2215
LUM296LS420420-Violet 305 610 915 1195 1730
LUM296LS445445-Indigo 610 1220 1785 2345 3310
LUM296LS470470-Blue 485 970 1400 1785 2545
LUM296LS505505-Cyan 305 585 840 1070 1475
LUM296LS527527-Green 280 510 715 890 1095
LUM296LS590590-Amber 380 740 1070 1500 1935
LUM296LS630630-Red 280 585 890 1170 1680
LUM296LS660 660-Deep Red 355 715 1045 1400 2035
LUM296LS730 IR730 330 635 940 1250 1860
LUM296LSWHTWhite 355 715 1070 1400 2035


*For reference only. Typical values subject to change.





Typical Spectral Characterization
UV Wavelengths
Expand
Visible Wavelengths
Expand
Broad Spectrum Wavelengths
Expand
Infrared Wavelengths
Expand

Typical Spectral Characterization
UV Wavelengths
Expand
Visible Wavelengths
Expand
Broad Spectrum Wavelengths
Expand
Infrared Wavelengths
Expand
UV Wavelengths



Typical Spectral Characterization
UV Wavelengths
Expand
Visible Wavelengths
Expand
Broad Spectrum Wavelengths
Expand
Infrared Wavelengths
Expand
Visible Wavelengths



Typical Spectral Characterization
UV Wavelengths
Expand
Visible Wavelengths
Expand
Broad Spectrum Wavelengths
Expand
Infrared Wavelengths
Expand
Broad Spectrum Wavelengths



Typical Spectral Characterization
UV Wavelengths
Expand
Visible Wavelengths
Expand
Broad Spectrum Wavelengths
Expand
Infrared Wavelengths
Expand
Infrared Wavelengths



Each Lumidox® II Array comes with it's own calibration document


Click image thumbnail or SKU below for specific product details
    ImageDescriptionUnitsPriceQty / Add to Cart
    Lumidox® Gen II 96-Well LED Arrays
    Lumidox® Gen II 96-Well LED ArraysEach$590.00$1,527.00
    Flow Reactor
    Flow ReactorEach$650.00
    SLAS Thermal Transfer Deck
    SLAS Thermal Transfer DeckEach$250.00